Paragon Kiln - Dragon 24

Exceptional element life

The Dragon exudes power. With 16,500 watts, there is ample power to heat the 24” W x 24” D x 27” H interior to cone 10. Having power to spare improves element life, because the elements do not “struggle” to reach high temperatures. The industrial-gauge heating elements are seated and protected in dropped, recessed grooves.

The elements are “tuned,” which means hotter elements are placed in the top and bottom of the firing chamber where more heat is needed. This results in superior heat distribution.

The benefits of extra insulation: save energy and benefit from down firing

Extra insulation saves energy and lengthens cooling. The 4” thick walls, top, and door are made of 3” firebrick backed by 1” of ceramic fiber block insulation. The floor is 4 ½” thick firebrick. The inner door is recessed to help seal in the heat. Because these kilns store heat so efficiently, elements last longer.

The extra insulation not only saves energy but also cools the kiln slowly without having to turn the elements back on. This gives the micro-crystalline structure and color of the glaze sufficient time for full development. Achieve dramatic shifts in glaze color such as iron reds and enjoy the richer look of gas firing with “down firing,” or slow cooling. Create breathtaking pottery in this exciting kiln.

Hinged switch box for easy maintenance

The ventilated switch box is generously slotted for air circulation for the long life of the electrical components. Hinged at the bottom, the switch box opens wide for easy maintenance. Open the box in seconds by merely removing two screws at the top. A folding support arm holds the box in the open position. There is plenty of working space around electrical components. A bank of built-in NEC/UL compliant high-amperage fuses protects the kiln and circuit wiring.

Convenient front loading

Potters who struggle with top-loading kilns will enjoy the Janus Dragon. The door swings open wide on a heavy ¾” steel rod with sealed bearings. Two spring-loaded latches press the door tightly closed.

Doorway Clearance

The Dragon will fit through a 34” doorway if the handles and back element cover are temporarily removed.

Optional colors at no extra charge

Kiln Accessories

Need other accessories for your kiln? Click the link here to explore more Kiln Accessories.

Here's a Sample DPF Firing schedule:

Note: The specific firing schedule may vary depending on the DPF manufacturer, its condition, and the desired level of cleaning. Always consult the DPF manufacturer's guidelines for the most accurate and safe procedures.

Here's a general firing schedule using multiple segments in Fahrenheit:

Segment 1: Pre-Heat

Temperature Range: 150°F to 350°F

Duration: 10-15 minutes

Purpose: Gradually warms up the DPF to prevent thermal shock.

Segment 2: Soot Oxidation

Temperature Range: 350°F to 800°F

Duration: 30-60 minutes

Purpose: Oxidizes soot particles in the DPF.

Segment 3: High Temperature Cleaning

Temperature Range: 800°F to 1000°F

Duration: 30-60 minutes

Purpose: Removes any remaining soot and ash.

Segment 4: Cool Down

Temperature Range: 1000°F to 150°F

Duration: 30-60 minutes

Purpose: Gradually cools down the DPF to prevent thermal shock.

Additional Considerations:

Oxygen Supply: Ensure adequate oxygen supply during the cleaning process.

Monitoring: Monitor the DPF's temperature and pressure throughout the cleaning cycle.

Repeat Cycles: If necessary, repeat the cleaning process until the desired level of soot removal is achieved.

Professional Assistance: For complex or heavily clogged DPFs, consider consulting a professional for cleaning.

Remember: This is a general schedule. Always refer to the DPF manufacturer's specific guidelines for the most accurate and safe cleaning procedures.

For those who need a specific DPF Firing schedule to enter based on the above guidelines:

Segment 1: 250F p/h to 350F - HOLD 15min

Segment 2: 350F p/h to 800F - HOLD 60 min

Segment 3: 350F p/h to 1000F - HOLD 60 min

Segment 4: off

Do not open the oven door until you are under 200F.