Skip to product information

    Paragon Kiln - PAF10-1 Glass Annealing Kiln

    $14,413.74 USD
    $12,972.37 USD


    Ask a question


    • American Express
    • Diners Club
    • Discover
    • Mastercard
    • PayPal
    • Shop Pay
    • Venmo
    • Visa

    Product description

    Model: Paragon PAF10-1 Glass Annealing Kiln
    Dimensions Inside: 35" (width) x 27" (height) x 29" (depth)
    Dimensions Outside: 56" (width) x 46" (depth) x 45" (height)
    Elements: Side and Back Elements Only
    Max Temp: Fires to 1100° F 
    Voltage: 240 volts / Single Phase
    Amperage: 48 amps 
    Receptacle: 6-50R
    Shipping Weight: 757# (Freight)


    • 3-Key Digital Sentry Xpress Controller
    • K-Type thermocouple
    • Built-in Stand
    • Instruction Manual
    • 1-year Limited Warranty (Refer to manufacturer's warranty)

    Expand the production capacity of your glass studio with the massive 16-cubic-foot PAF10-1 glass annealing kiln. Make glass vases, bowls, and figurines without worrying about having enough annealing capacity.

    The PAF10-1 is designed for annealing, so the maximum temperature is 1100°F (593°C). With this kiln, you are buying only the heating capacity that you need for annealing.

    The PAF10-1 is stackable. As your business grows, add another PAF10-1 without using more floor space. The feet of the top kiln fit into the four stacking points of the bottom kiln. Level the kiln in minutes with levelers that are built into the feet.

    Spring-loaded quick-release door latches allow one-handed loading into the hot kiln. The doors open smoothly on heavy-duty 3/4” hinge shafts. The firing chamber opening is lined on all four sides with a fiber rope door seal. The doors also each have a seal where the doors meet in the center. Each door has a safety switch that turns off the elements when the door is opened. The controller remains powered and automatically resumes firing when you close the doors.

    The kiln heats from the sides and back. Dropped, recessed brick grooves protect the elements for long life. The kiln is heavily insulated for economical operation. The insulating firebricks and fiberboard, wrapped in heavy-gauge steel, soak up heat for slow, efficient cooling:

    • 4” thick ceramic fiberboard top
    • 3” thick doors: 3” ceramic fiberboard
    • 4” thick walls: 1” ceramic fiberboard and 3” firebricks
    • 3” thick firebrick bottom

    Paragon’s PAF10-1 is made for years of rigorous firing with a heavy 2” tubular steel frame. A heat shield and 1 3/4” air gap between the kiln and ventilated switch box help keep electrical components cool for long, trouble-free service. Costly heavy-gauge nickel-plated copper wiring is covered with high temperature glass-braided insulation. Turn off power to the controller when the kiln is not in use using an on/off switch on the control panel.

    Thermocouple with “special limit” wire

    The thermocouple senses temperature inside the kiln. It is the small rod that extends into the firing chamber. The ¼” wide Type-K, 14-gauge, exposed-tip thermocouple is made with special-limit wire for superior accuracy. The exposed tip gives the controller a fast response time for even temperatures during holds. The thermocouple is made in America to our exacting standards.

    Designed for production

    Paragon’s warranty is not affected by the frequency of use. Fire your new kiln every day if you want, even in commercial settings. That will have no effect on the warranty period.

    Kiln Accessories

    Need other accessories for your kiln? Click the link here to explore more Kiln Accessories.

    View full details

    Paragon Kiln - PAF10-1 Glass Annealing Kiln

    $14,413.74 USD
    $12,972.37 USD