Side-Only Element Design
The KO Series design was inspired, in part, by culinary bladesmiths who generally make long, thin blades. These bladesmiths needed to use the entire length of the chamber without overheating their blades at the back wall. Evenheat took a fresh look and improved the product.
The front to back temperature distribution in the KO is incredibly even. Positioning in the chamber has no effect and the entire length can be used. The KO, with it's side-only element design, is the new standard!
Side Opening Door
Heat treating requires the removing of very hot material from the chamber in order to quench. Everything in the chamber is hot, which includes the door. The doors on the KO's swing out and to the side. This puts the super-heated door well away from you as you concentrate on the work at hand.
Cool Touch Handle
The handle/latch on our swing out door is conveniently located at the front of the door, not hidden along the side. This spring loaded, phenolic handle is cool to the touch, is one-handed in design and serves as the door latch as well.
Relay Access Port
All KO models incorporate a Relay Access Port for simple, no-panel-off relay replacement. Simply
remove the access plate to gain access to the relay. There's no need to remove the control panel and dig into the internal wiring. It's simple and effective.
It's a given that mechanical relays will fail at some point. This relay access port really comes in handy when they do.
Door Shield
The KO's feature a door shield to provide protection against firebrick damage as well as to reduce the temperature seen at the door and door handle.
Swing View Equipped
The TAP II and Rampmaster temperature controls are fitted to the Swing View Adjustable Enclosure. The swing view is a pivoting, swing-up enclosure that allows you to rotate the control to a comfortable viewing and programming angle.
The swing view pairs well with touchscreen controls like the TAP II as viewing angle can be perfectly aligned.
Firebrick Construction
Like all our heat treat ovens, LB models are built completely of firebrick. Firebrick has the desired characteristic of storing heat and then releasing it slowly and gently during the soak/hold portion of the
process. It's this particular quality that serves the heat treat process so well.
Loud Alarm Output Jack
A Loud Alarm output jack is included to connect the optional Loud Alarm. It reaches 80db of alarm sounds to never miss another quench.
2400°F Maximum Temperature
The maximum usable temperature for the KO models is 2400°F (1316°C). This maximum is well within the range for the vast majority of steels used by knife makers and machine shops.
Evenheat uses a Sandvik Iron based alloy wire for all KO model heating elements. This alloy has proven to last, it tends to stay in place and generally works satisfactory when used at temps below 2400°F.